New Ponics Pump 400, Salt/Fresh, Submersible, 6ft Cord, 25W

If you are trying decide to buy Ponics Pump 400, Salt/Fresh, Submersible, 6ft Cord, 25W worthy and huge saving. Dont spend your more time ! We really provide the best and lowest price on Ponics Pump 400, for you through our researched from numerous online retailers price. Check today special offer and get huge discount on Ponics Pump 400, to avoid your disappointment.
You can purchase this amazing Ponics Pump 400, at Amazon with Fast & Super Saver Shipping! Click here to get a great price on this Ponics Pump 400,!

Here are some of the great features of Ponics Pump 400, Salt/Fresh, Submersible, 6ft Cord, 25W

Ponics Pump 400,, CHOOSING A "PONICS" PUMP

First remember:
 • "Maximum Flow Rate" is meaningless because it is at ZERO head/lift.
 • "Maximum Head/Lift" is meaningless because the flow at that height is only a trickle.

You need an affordable quality pump with the desired flow at your required head at the lowest wattage.

Step 1: Determining Desired Flow Rate
Most ponics systems typically flow through a single loop allowing a single pump. A grow-bed loop flow rate near 100 GPH is sufficient for grow beds up to 120 feet. If you have multiple grow-bed loops, then 100 GPH is needed for each loop.

Step 2: Calculating System Head
Measure the vertical distance from the "top" of the water in the pump tank to the pump discharge pipe. A typical requirement is 100 GPH @ 3 feet.

Step 3: Pump Selection Considerations
 • Continuous vs. intermittent pump duty cycle increases pump life, plus no need for a timer or level control.
 • A rule of thumb is that an average pump will last 2-4 times the stated warranty period.
 • Best to buy a backup.

Step 4: Is A Foam Filter Needed?
The objective of a filter is to keep objects/grit out of the pump.
 • While great for ponds, a foam filter in "ponics" systems is a maintenance headache as good place for algae to grow.
 • If you endeavor to have clear water... you will likely need a separate pre-filter, so a foam filter is redundant.
 • Green water algaponics systems require a vortex pre-filter; a foam filter would only stop-up with desirable algae.
 • Micro-algae will not hurt a pump unless it stops the flow of water.

  • WATER-LUBRICATED HYDROGENATED NITRILE (HNBR) BEARINGS are used because they possess a very low coefficient of friction, have inherent vibration-dampening qualities and are non-polluting. Because of its durability, HNBR is used by the US Navy for propulsion shaft applications.
  • 6 FOOT QUALITY CORD: Many pump manufacturers use an inferior quality cord, our Electric Cord is the highest quality... waterproof, 18# gauge wire, molded three pin plug and wire is 100% copper. Heavy duty SJTW flexible vinyl jacketed cord with ground, resists oil, grease, moisture, abrasion resistant, very good flexibility at all temperatures.
  • UL APPROVED: The file number is E329601.
  • EASY CLEAN: No tools required to disassemble and clean filter/impeller.
  • FLOW RATES: 396 Gallons Per Hour (GPH) @ 0' Lift; 370 GPH @ 1' Lift; 363 GPH @ 2' Lift; 343 GPH @ 3' Lift; 306 GPH @ 4' Lift; 264 GPH @ 5' Lift; 221 GPH @ 6' Lift; 132 GPH @ 7' Lift Max Lift - 8' 2".
  • WATTS: 25 - VOLTS AC: 120
  • THREE OUTLET ADAPTORS : For 1/2", 5/8" and 3/4" tubing.
  • WATER TYPE: Salt or Fresh
  • ADJUSTABLE INPUT FLOW RATE
  • EPOXY RESIN ENCASEMENT of key internal motor components prevents unwanted conductivity and corrosion of metal parts.
  • SALT OR FRESH WATER READY: All components are designed to not corrode in either salt or fresh water.
  • NEODYMIUM IRON BORON (NdFeB) MAGNETS are used in all our electric motors because they are the most powerful permanent magnetic materials commercially available and increase energy efficiency.
  • OIL FREE, NO EXPOSED COPPER Safe for fish!
  • POLISHED ALUMINUM OXIDE CERAMIC IMPELLER SHAFT insures long pump life. This non-corrodible ceramic shaft is 3 times as hard as stainless steel.
  • NO SEAL TO FAIL between the pump impeller and the motor because ingeniously, the motor is water lubricated and cooled. Therefore, it is not possible for water from seal leakage to damage the pump motor.
  • LIMITED WARRANTY: 1 Year
get discount prices

Ponics Pump 400, Best Price on Best Deals 2012. Find best deal on Ponics Pump 400, Salt/Fresh, Submersible, 6ft Cord, 25W with Fast & Super Saver Shipping. Best Deals hot offers!